Teledyne TIENet 301 Installation And Operation Manual page 21

Configure Measurements
1 - XXX
Configure Measurements
2 - 301
TIENet Configuration
The sensors are being
configured. Please wait...
Figure 2-9 Menu Tree: 301 Configuration
Select Operation
1. Hardware Setup
2. Configure
3. Administration
4. Home
Hardware Setup
1. Smart Sensor Setup (TIENet)
2. SDI-12 Setup
3. MODBUS Input Setup
4. MODBUS Output Setup
5. Modem Setup
TIENet Setup (Smart Sensor)
• Perform Scan
• Configure Measurements
XXX Parameter
XXX Parameter
301 pH
Press NEXT to confirm configuration.
There may be a slight delay.
TIENet® 301 pH/Temperature Device
Section 2 Installation and Setup for Signature
With initial connection, begin
by performing a hardware
scan to add the 301.
XXX Parameter
Scroll with arrow keys to
highlight / select / deselect
any displayed parameter or
301 Temperature
edit its name.
TIENet Setup (Smart Sensor)
The sensors have been configured.
Press Enter for a list of
sensors. Scroll to the 301
and press Enter to select.
2-9