Advertisement
Groove
9. Set the 3
Floor in place, adjust the 2
rd
to fit properly in the ceiling groove of the 3
careful when inserting the 3
Short screw
11. Set the Front Roof in
place and attach with (2)
short screws.
Floor Divider
nd
Floor. (Be
rd
Floor into the Front Panel
rd
12. Attach the Rear Roof, make sure the Attic Dividers are set properly in the top and
bottom notches. Use (2) long screws through the peak of the Side Panels into the
peak of the Rear Roof support. Use (2) short screws in the rear side roof.
10. Set the 2 Attic Dividers in
Long screw
Page 3
place, make sure the wallpa-
per matches on both sides.
Short screw
Advertisement
