Advertisement
ASSEMBLY INSTRUCTIONS
Dowel
1. Attach the Left Side Panel to
the Front Panel using (1) dowel.
(Use the wallpaper patterns to
identify the left and right side
Notch-
5. Set the 1
Floor Divider in the
st
groove, making sure the wall-
paper matches on each side.
(note the notches on divider)
Dowel
2. Attach the Right
Side Panel to the
Front Panel using (1)
6. Set the 2
Floor in
nd
place (the groove goes
towards the Front
Page 2
Dowel
3. Attach the Rear Foundation to
the Side Panels and insert (2)
dowels.
7. Adjust the 1
Floor Divider
st
to set properly in the 2
groove.
Groove
4. Attach the Base Floor (the
groove goes towards the Front
Groove
Notch-
8. Set the 2
Floor Divider
nd
Floor
in place, making sure the
nd
wallpaper matches on each
side.
Advertisement
