Table of Contents
Advertisement
LC-R60HDU
No.
Adjusting point
19
Color-related
performance
checking
20
Video-related
performance
checking
21
Audio-related
performance
checking
22
Off-timer per-
formance
checking
23
Thermistor
performance
checking
24
Factory settings
Adjusting conditions
1. Receive the HD color bar
signal.
1. Receive the ITE pattern sig-
nal.
Adjusting procedure
» Select L1 in the process mode. Check the color
and tint settings.
» Select L2 in the process mode. Check the picture,
brightness and sharpness settings.
» Select L3 in the process mode. Check the bass,
treble and balance settings.
» Select OFF in the process mode. Make sure that
the off-timer starts with the 5-minute count and
counts down every one second for one minute and
that the set turns itself off at the 0-minute count.
» Make sure the TEMP display appears.
» Using the remote controller, make "FACTORY
SETTINGS 4". (Common settings are made for all
the destinations.)
Press "SSS4".
34
Advertisement
Table of Contents
