UBSAN Q4 Instruction Manual page 5

4 Nano quad
4.1 Charge the Q4
Connect the battery with USB charger, then connect the USB charger to a computer or
other USB connector, such as a smartphone charger. The LED lights up while charging and
turns o when charging is complete. The voltage of the USB is +5±0.5V.
The nano quad is equipped with a 3.7V 100mAh Lipo battery
4.2 Power on the Q4
5 TRANSMITTER
5.1 Identi cation and functions of the Main Menu
TRANSMITTER
(2) Elevator/Rudder Stick
ON OFF
(5) Power SW
(MODE 1)
4
(4) Elevator Trim
(1) Throttle /Aileron stick
(3) Aileron Trim