Table of Contents
Advertisement
76
ASSEMBLY STEP THREE
Assembling the console and connecting the magnetic line.
1. Connecting the magnetic line of the console with the line in the holder console holder.
2. After connected the magnetic line, place the console at the joint of console holder and fasten it
(as shown), using 4pcs of (13) and 4pcs of (14).
3. Stepping on the running belt run it, and press the button
machine is running normally or not, the console data display is comprehensive and accurate or not.
4. If the machine runs normally, all bolts are tightened in place, then, the treadmill is assembled.
8
| ASSEMBLY INSTRUCTIONS
17
to start the treadmill, check the
Magnetic wire
connecting
(one wire only)
Advertisement
Table of Contents
