Table of Contents
Advertisement
IV. ASSEMBLY INSTRUCTIONS
User Manual of this section is designed to ensure that the treadmills can be assembled correctly and
easily.
• Considering the big size of the treadmill, please select the location where the treadmill will be placed
and ensure there is enough space around it.
• Place all parts of the treadmill in the empty area and remove all packing materials. Do not discard the
packing materials until the assembly work is completed.
• All bolts must be tightened during the assembly process unless otherwise stated, and all bolts must
be tightened when the assembly work is completed.
• When assembling the treadmill, please make sure all parts are assembled according to the assembly
drawing.
Magnetic wire
connecting
(one wire only)
ASSEMBLY STEP ONE
Connect the magnetic induction line and assemble the stand column.
1. Remove the packing materials on both sides of the stand column.
2. Fix the stand column to the corresponding position of the main frame as shown in the picture below.
NOTE: Connect the magnetic line below.
6
| ASSEMBLY INSTRUCTIONS
9
10
7
59
5
66
90
Connect the
up and down
(one wire only)
Advertisement
Table of Contents
