Comlink-2 Location & Connection - Airstream TC5-ITA User Manual

TC5-ITA
Comlink-2 Location & Connection
a. Unplug each unit.
b. Plug the communication card in the unit.
Open the cover. Drill a 5/16" hole through the bottom of the controller and
thread the communication cable through the hole. Use the grommet pro-
vided to secure the cable. Connect the cable to the terminals of the com-
munication card as shown below. When connecting two cable ends to-
gether, solder the joint and use a heat shrink to ensure a proper contact.
Line-up the comlink card with the con-
nector and insert it in the upright posi-
tion (see illustration beside). For com-
munication, always use a 1 twisted pair
shielded cable. The maximum length of
the cable is 3000m and the recom-
mended wire diameter is 1.0 mm. Use
a lightning protection module when
running the cable between buildings.
12
TC5-ITA rev.02
COMLINK-2 CARD