Table of Contents
Advertisement
TC5-ITA
AUTO-RESET SETTINGS:
The following procedure shows how to specify the frequency at which
automatic resets are performed.
•
Select "RESET SETTINGS" using the function selection buttons.
The hour at which the auto-reset is performed flashes on the dis-
play. Note that this menu is only accessible if the auto-reset func-
tion is enabled (internal switch #7 is ON).
•
Use the adjustment buttons to set the hour to the desired value.
•
Press the right-arrow key once. The minutes flash on the display.
•
Use the adjustment buttons to set the minutes to the desired value.
•
Press the right-arrow key. The frequency at which auto-resets are
performed is displayed, alternating with the letters "PEr".
•
Use the adjustment buttons to set the frequency to the desired
value. The frequency can be adjusted once every 1 to 7 days. Se-
lect "1" to reset the position every day; select "2" to reset the
position every 2 days, etc.
26
TC5-ITA rev.02
SINCE THE RESETS MAY CAUSE THE CLOSURE OF
AIR INLETS, DO NOT PROGRAM THE RESET OF ALL
INLETS SIMULTANEOUSLY.
Advertisement
Table of Contents
