MAINTENANCE TASKS AND CHECKLIST
Note: Follow Lockout / Tagout prior to performing any checks or maintenance.
Daily
Use an air-hose to blow-off the dust and wood chips that accumulate in and around the
machine, especially the wheels.
Check band blade tracking
Check head rig v-belts
Check guides for adjustment
Check proper conveyor belt tracking
Note: The machine operator is closer to the operating mechanism of the machine during
clean up than during production – extra care should be taken.
Do NOT clean with flammable or combustible materials.
Follow applicable codes and standards with regards to:
o Ventilation and monitoring of work area for excessive accumulation of
hazardous vapors
o Wearing personal protective equipment for handling materials
o Using proper procedure for disposing of all waste materials
Weekly
Check all setscrews
Grease 28" wheel bearings
Monthly
Grease slow moving bearings
Every 3 Months
Motors should be greased with one pump of grease from a grease gun
29