Table of Contents
Advertisement
Conveyor Belts
If the conveyor belts ever need to be adjusted or replaced, use the belt extenders on the in-
feed end of the machine. Each conveyor has two belt extenders on the in-feed end (one on
each side). These should be used to tighten or loosen the belt conveyor.
These adjustments should also be used to align the belt. With the Feed works empty and in
motion, adjust one side until the belt is tracking perfectly.
Loosen locking bolts to allow for adjustments
Figure K: Conveyor
Belt Adjuster Arm
(One on Each Side)
Turn indexer nut to tighten
belt or adjust belt tracking
26
Advertisement
Table of Contents
