Roland Camm-1 GR2-640 Installation Manual page 19

3. Installing the Driver
Click [Ports (COM & LPT)], and then click [Communications Port (COM1)] or [Commu-
H
nications Port (COM2)].
If [Ports (COM & LPT)] is not displayed in [Device Manager], turn on [Show hidden devices] in the
[View] menu. Select the port connected to the RS-232C interface for the communication port.
Select the [Port Settings] tab, and then select the same values as the communication
I
settings for the machine set in step
Select [None] for [Flow control].
Click [OK].
J
18
1.Installation and Settings
D .