Roland Camm-1 GR2-640 Installation Manual page 18

To change communication settings, press [ ] or [ ] and select from the following combinations.
Panel display
Bits/second
Parity
Data bits
Stop bits
Press [ENTER].
E
The changed communication settings are saved.
Log on to Windows as the "Administrator" or a member of the "Administrators"
F
group.
Set communication on the computer.
Display the "Device Manager" screen.
G
Windows 10:
From the [Start] menu, click [Windows System], and then click [Control Panel].
1
Click [Hardware and Sound], and then click [Device Manager].
2
Windows 8.1:
From the [Start] menu, click [PC settings], and then click [Control Panel].
1
Click [Hardware and Sound], and then click [Device Manager].
2
• 9600, n, 7, 1, p
• 9600, o, 7, 1, p
• 9600, e, 7, 1, p
• 9600, n, 8, 1, p
• 9600, o, 8, 1, p
• 9600, e, 8, 1, p
9600 / 19200 bps
Data transfer speed
n: none / o: odd / e: even
Method used to check if data is restored correctly
7/8
Data length (bit configuration)
1
• 19200, n, 7, 1, p
• 19200, o, 7, 1, p
• 19200, e, 7, 1, p
• 19200 n, 8, 1, p
• 19200, o, 8, 1, p
• 19200, e, 8, 1, p
1.Installation and Settings
3. Installing the Driver
17