Roland Camm-1 GR2-640 Installation Manual page 17

3. Installing the Driver
To install AAS II VBA in CorelDRAW and Adobe Illustrator, click [Install] when the fol-
I
lowing screen appears.
When the following screen appears, the installation is finished. Click [OK].
Setting RS-232C Communication
Check the communication settings of the machine and ensure they are the same as those of the
computer. If they are different, the machine will not operate correctly.
Procedure
Turn on the machine.
A
Press [MISC] on the operation panel.
B
If material has been loaded in the machine, press [ON/OFF LINE] to switch to offline mode.
Press [ ] several times to display the screen shown below.
C
Set communication
Select:
Press [ENTER], and then check the communication settings of the machine.
D
The current communication settings are displayed.
9600 n 8 1 p
Change:
16
1.Installation and Settings
OK:ENTER
OK:ENTER