Table of Contents
Advertisement
ADS7142-Q1 GUI Functional Modes
Figure 4-4
shows the GUI after an Alert condition is encountered. In this example, Channel 0 has reached the
High Threshold. This is indicated by the High Threshold indicator on the right side of the corresponding graph.
Since the device is configured for Pre Alert Mode operation with both channels enabled, the conditions prior to
reaching the Alert condition are displayed. The Alert condition must be cleared, by clicking on the Threshold
indicator before the next sequence is run to ensure normal operation of the device.
14
BOOSTXL-ADS7142-Q1 BoosterPack™ Plug-In Module
Figure 4-4. Operation After Alert Condition
Copyright © 2021 Texas Instruments Incorporated
SBAU321B – NOVEMBER 2018 – REVISED JUNE 2021
Submit Document Feedback
www.ti.com
Advertisement
Table of Contents
