Printme Cloud Printing; Configure Printme Cloud Printing; Job Mismatch Settings - Canon imagePRESS Server G200 Configuration And Setup

3 For Default Queue, select the connection to which the imagePRESS Server downloads files that do not specify a
connection.
4 Set USB Media > Autoprint to Print All.
5 Insert the flash drive into a computer and create the following folders at the top (root) level of the USB flash
drive:
•
Print
•
Hold
•
Direct
• name of virtual printer (virtual printers display as printer name : virtual printer name)
6 Save the files from the computer to the USB flash drive.
7 Remove the USB flash drive from the computer and connect it to the USB port on the imagePRESS Server.
Important: Make sure that the USB flash drive is properly stopped before you disconnect it from the
computer.

PrintMe cloud printing

Users with a PrintMe subscription can upload a document to the PrintMe cloud service and then print the document
from the imagePRESS Server.
•
The PrintMe feature on the imagePRESS Server requires a subscription to the PrintMe cloud service.
•
Canon, Inc. guarantees communication only between EFI PrintMe cloud service and the imagePRESS Server.
•
Contact Electronics For Imaging for PrintMe cloud service issues, or send an e-mail to PrintMe support at
printmesupport@efi.com.
•
PrintMe availability may vary, depending on the country or region.
For more information about using PrintMe cloud printing, see Printing, which is part of the user documentation set.

Configure PrintMe cloud printing

You must set up the imagePRESS Server through Configure to enable PrintMe cloud printing.
1 In Configure, as Administrator, click Job Submission > PrintMe and then select Enable PrintMe.
2 Optional: If you need PrintMe cloud printing to connect to the imagePRESS Server through a proxy server, click
the Manage link next to Proxy Settings.
a) In the Proxy dialog box, enter the required information about the proxy server.
3 Click Save.
Configuration and Setup
Configuring print job management settings
78