Managing Firewalls; User Software - Canon imagePRESS Server G200 Configuration And Setup

2 Specify how frequently the imagePRESS Server contacts the Update Server.
This feature sets a schedule for downloading updates.
Note: The system updates are performed only when there are no jobs in process. If the system updates might not
occur due to extensive printer usage, increase the frequency of updates (such as daily instead of weekly).
3 If you use a proxy server to connect through a firewall to the Update Server, click the HTTP Proxy Settings link. In
the Proxy dialog box, select Enable HTTP Proxy, enter the following information, and then click Save.
•
Address: proxy server IP address
•
Port: port used by the proxy server
•
User Name: user name for accessing the proxy server
•
Password: password for accessing the proxy server
4 Click Save.
Note: To confirm all outstanding updates are installed, check for product updates (for example, click Check for
Product Updates on the Home tab in WebTools).

Managing firewalls

If your network includes a firewall, make sure that the network firewall is configured to enable communication
between the imagePRESS Server and the client computers.
If the imagePRESS Server is behind a network firewall, configure a proxy server to allow the imagePRESS Server
access to the internet for automatic updates.
To configure a proxy server, open Configure and select Network > Proxy, then select Enable HTTP Proxy and enter
the required information about the proxy server.

User software

The user software applications and printer drivers are available through the following methods:
•
User Software DVD
•
Download using WebTools
•
Updates through Fiery Software Manager
Configuration and Setup
Administering the imagePRESS Server
93