Staring / Stopping The Motors - UBSAN ZINO MINI PRO User Manual

3.5 Starting/Stopping the Motors
Motor starting condition
(1) The aircraft, remote control, and mobile phone have been connected
successfully ;
(2) The aircraft compass has been calibrated (APP doesn't prompt to calibrate
the compass) ;
(3) The aircraft must be placed on a horizontally leveled ground ;
(4) Aircraft has not locked sufficient GPS satellites for positioning. please
don't force take-off ;
(5) The power of the drone should be ≥15% ;
Starting the Motors
Push both stick down and outwards as shown in picture to start the motors.
Once the motors start spinning, Release both sticks.
Stopping the Motors
When the motors are running, Push both stick down and outwards again to
stop the motors. Release both sticks once motors stop.
Forced Motor Stop
When flying in the air, the motors can be forced to stop in 2 seconds by push
both sticks down and outwards. Use this function with caution, as it can cause
the aircraft to fall and may endanger personal safety.
Connected
4 5 . 8 7 7 5 0 3 , - 1 0 6 . 1 2 3 9 8 4 S P E E D 0 . 0 M / S
H : 0 . 0 m D : 0 . 0 m
4 5 . 8 7 7 5 0 3 , - 1 0 6 . 1 2 3 9 8 4 ， 6 5 m
15
0 5 0
P i t c h 3 5 ° Ro l l 4 5 ° Ya w 2 5 °