Installing And Updating Software, Drivers, And Firmware - Sharp MX-B427PW User Manual

Set up, install, and configure
Installing and updating software, drivers, and firmware
Installing the printer software
1
Obtain a copy of the software installer package.
•
From our website.
•
From the place where you purchased the printer.
2
Run the installer, and then follow the instructions.
3
For Macintosh users, add the printer.
Note: For Macintosh computers with macOS version 10.7 or later, you do not need to install the driver to
print on an AirPrint-certified printer.
Updating firmware
Some applications require a minimum device firmware level to operate correctly.
For more information on updating the device firmware, contact your sales representative.
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Settings > Device > Update Firmware.
3
Browse to the flash file.
4
Click Upload.
Exporting or importing a configuration file
You can export the configuration settings of your printer into a text file, and then import the file to apply the
settings to other printers.
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
From the Embedded Web Server, click Export Configuration or Import Configuration.
3
Follow the instructions on the screen.
4
If the printer supports applications, then do the following:
a
Click Apps > select the application > Configure.
b
Click Export or Import.
20