Sharp MX-B427PW User Manual page 47

Use printer menus
Menu item
Set PSK
WPA2/WPA‑Personal
AES*
802.1x Encryption Mode
WPA+
WPA2*
IPv4
Enable DHCP
On*
Off
IPv4
Set Static IP Address
IP Address
Netmask
Gateway
IPv6
Enable IPv6
On*
Off
IPv6
Enable DHCPv6
Off*
On
IPv6
Stateless Address Autoconfiguration
Off
On*
IPv6
DNS Address
IPv6
Address Prefix
0–128 (64*)
IPv6
All IPv6 Addresses
IPv6
All IPv6 Router Addresses
Description
Set the password for secure wireless connection.
Note: This menu item appears only if Wireless Security Mode is set
to WPA2/WPA-Personal or WPA2‑Personal.
Enable wireless security through WPA2/WPA.
Note: This menu item appears only if Wireless Security Mode is set
to WPA2/WPA-Personal.
Enable wireless security through 802.1x standard.
Note: This menu item appears only if Wireless Security Mode is set
to 802.1x - Radius.
Enable Dynamic Host Configuration Protocol (DHCP).
Note: DHCP is a standard protocol that allows a server to distribute
IP addressing and configuration information dynamically to clients.
Set the static IP address of your printer.
Enable IPv6 in the printer.
Enable DHCPv6 in the printer.
Set the network adapter to accept the automatic IPv6 address
configuration entries provided by a router.
Specify the DNS server address.
Specify the address prefix.
Show all IPv6 addresses.
Show all IPv6 router addresses.
47