Sharp MX-B427PW User Manual page 50

Use printer menus
Menu item
Set Hostname
Domain Name
Allow DHCP/BOOTP to update
NTP server
On*
Off
Zero Configuration Name
Enable Auto IP
On*
Off
DNS Address
Backup DNS
Backup DNS 2
Backup DNS 3
Domain Search Order
Enable DDNS
Off*
On
DDNS TTL
Default TTL
DDNS Refresh Time
Enable mDNS
On*
Off
WINS Address
Enable BOOTP
Off*
On
Restricted Server List
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the current TCP/IP host name.
Set the domain name.
Note: This menu item appears only in the Embedded Web Server.
Allow the DHCP and BOOTP clients to update the NTP settings of the printer.
Specify a service name for the zero configuration network.
Note: This menu item appears only in the Embedded Web Server.
Assign an IP address automatically.
Specify the current Domain Name System (DNS) server address.
Specify the backup DNS server addresses.
Specify a list of domain names to locate the printer and its resources that reside
in different domains on the network.
Note: This menu item appears only in the Embedded Web Server.
Update the Dynamic DNS settings.
Specify the current DDNS settings.
Update multicast DNS settings.
Specify a server address for Windows Internet Name Service (WINS).
Allow the BOOTP to assign a printer IP address.
Specify an IP address for the TCP connections.
Notes:
•
This menu item appears only in the Embedded Web Server.
•
Use a comma to separate each IP address.
•
You can add up to 50 IP addresses.
50