Table of Contents
Advertisement
TLA2024EVM-PDK GUI
The GUI displays two registers even though there is only one configurable register in the TLA2024 device. For
the firmware to remain in synchronization with the GUI, all communication is first directed to a pointer register
internal to the device and either points to the conversion register or the configuration register.
Configuration of the TLA2024 device is accomplished using the drop-down menu and click options shown in the
Field View on the right side of the GUI window. It is also possible to double-click on the various bits to toggle the
bit settings. As the bit settings change, the Field View options will also change to correspond to the selection.
28
TLA2024EVM-PDK User's Guide
Figure 5-21. Register Map
Figure 5-22. TLA2024 Configuration
Copyright © 2021 Texas Instruments Incorporated
www.ti.com
SBAU368 – FEBRUARY 2021
Submit Document Feedback
Advertisement
Table of Contents
