Table of Contents
Advertisement
Quick Links
This user's guide describes the characteristics and use of the TUSB564RNQ evaluation module. This
document describes how to power up the EVM and also includes schematics that can be used as
reference design for the Alternate mode implementations of the system with the TUSB564 device.
...................................................................................................................
1
2
3
3.1
3.2
3.3
4
4.1
4.2
Bill of Materials
1
2
Test Board Setup
3
4
.....................................................................................................................
5
TPS65986
6
TUSB564RNQ EVM Power
1
TUSB564 Configuration Pins
2
Configuration Pin Level Definitions
3
USB 3.1 EQ Settings
4
DisplayPort™ EQ Settings
5
Trademarks
USB Type-C is a trademark of USB Implementers Forum.
DisplayPort is a trademark of Video Electronics Standards Association.
VESA is a registered trademark of Video Electronics Standards Association.
All other trademarks are the property of their respective owners.
SLLU288 - March 2018
Submit Documentation Feedback
TUSB564RNQ Evaluation Module
.........................................................................................................
........................................................................................
....................................................................................
.................................................................................................................
..........................................................................................................
......................................................................................................
.........................................................................................................
............................................................................................................
.....................................................................................
..................................................................................
................................................................................................
...............................................................................................
........................................................................................
........................................................................................................
.................................................................................................
...............................................................................................................
Copyright © 2018, Texas Instruments Incorporated
Contents
......................................................................
..................................................................
List of Figures
List of Tables
User's Guide
SLLU288 - March 2018
TUSB564RNQ Evaluation Module
2
2
3
3
3
4
5
5
9
2
2
5
6
7
8
3
3
3
4
9
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Texas Instruments TUSB564RNQ
Summary of Contents for Texas Instruments TUSB564RNQ
-
Page 1: Table Of Contents
SLLU288 – March 2018 TUSB564RNQ Evaluation Module This user's guide describes the characteristics and use of the TUSB564RNQ evaluation module. This document describes how to power up the EVM and also includes schematics that can be used as reference design for the Alternate mode implementations of the system with the TUSB564 device. -
Page 2: Introduction
DP-Branch / Sink Figure 2. Test Board Setup The TUSB564RNQ EVM has a legacy Type-A USB receptacle to connect to a USB hub or device and a DisplayPort receptacle to connect to DisplayPort sink. The EVM uses TI's TPS65986 device for USB Type-C PD control and to configure the TUSB564. -
Page 3: Tusb564Rnq Evm Configuration
TUSB564RNQ EVM Configuration www.ti.com TUSB564RNQ EVM Configuration This section provides the configuration options available in the TUSB564RNQ EVM. TUSB564RNQ EVM Default Configuration Table 1 lists the default configuration pins for the TUSB564 device. Configuration settings may need to be optimized depending on the amount of loss of each channel in the system. The EVM is configured to GPIO mode by default. -
Page 4: Power
5-V external power is applied through J8 only if stand-alone operation is desired. If testing DisplayPort only, or if bypassing VBUS power, the EVM must be powered through J8 (a 5-V, 1-A input). TUSB564RNQ Evaluation Module SLLU288 – March 2018 Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated... -
Page 5: Tusb564Rnq Evm Schematics And Bill Of Materials
TUSB564RNQ EVM Schematics and Bill of Materials www.ti.com TUSB564RNQ EVM Schematics and Bill of Materials Schematics The section provides schematics as supporting reference information. VBUS SSRXN VBUS_DS SSRXP 1064_VCC 26 @ 100MHZ VBUS USB_N USB2_DM 100nF VBUS 470nF SSTXP VBUS... -
Page 6: Tusb564Rnq Evm Configuration Pins
TUSB564RNQ EVM Schematics and Bill of Materials www.ti.com 1064_VCC 1064_VCC 1064_VCC JMP1 JMP2 4 Pin-T Berg Jumper 4 Pin-T Berg Jumper FLIP/SCL HDR3X1 M .1 1064_VCC 1064_VCC JMP3 JMP4 SSEQ1 SSEQ0/A0 1064_VCC 4 Pin-T Berg Jumper 4 Pin-T Berg Jumper... - Page 7 TUSB564RNQ EVM Schematics and Bill of Materials www.ti.com VBUS 0.22uF VBUS SYS_PWR PP_HV1 PP_HV2 PP_HV3 PP_HV4 VBUS4 VBUS_DS VBUS3 1uF 25V PP_5V0_1 VBUS2 TPS65986_3P3V PP_5V0_2 VBUS1 PP_5V0_3 PP_5V0_4 RPD_G1 10uF C_CC1 VDDIO PP_CABLE C_CC2 VOUT_3P3 RPD_G2 10uF VDDIO LDO_3P3 VIN_3V3...
- Page 8 TUSB564RNQ EVM Schematics and Bill of Materials www.ti.com 1064_VCC TPS65986_3P3V VDDIO LDO_3P3 3.3V REGULATOR SYS_PWR 0 DNI 3P3VCC 26 @ 100MHZ SHDN/ SENSE 10uF LED Green 22uF 5V INPUT TPS7A4533 SYS_PWR +5V / Max 3A Input PMEG3050EP, 115 2.1mm x 5.5mm...
- Page 9 TUSB564RNQ EVM Schematics and Bill of Materials www.ti.com Bill of Materials Table 5 lists the bill of materials. Table 5. Bill of Materials Item Reference Part Footprint Manufacturer Manufacturer Part Number Description C1,C5,C7,C9,C10,C12,C14, 100 nF c0201 Murata GRM033R61A104KE15D CAP CER, 0.1-µF, 10-V X5R 0201...
- Page 10 TUSB564RNQ EVM Schematics and Bill of Materials www.ti.com Table 5. Bill of Materials (continued) Item Reference Part Footprint Manufacturer Manufacturer Part Number Description 10k DNI r0402 Panasonic Electronic ERJ-2GEJ103X RES SMD 10 kΩ 5% 1/10W 0402 Components R2,R6,R7,R8,R11,R41,R43, r0402 Panasonic Electronic ERJ-2GE0R00X RES SMD 0-Ω...
- Page 11 TUSB564RNQ EVM Schematics and Bill of Materials www.ti.com Table 5. Bill of Materials (continued) Item Reference Part Footprint Manufacturer Manufacturer Part Number Description STDOFF1,STDOFF2,STDO 1902E Standoff Keystone 1902E 1-inch nylon FF3,STDOFF4 4-POS 50-MIL SMT sw_smvt_dip_4pos_8 C&K(ITT-CANNON) TDA04H0SB1R SWITCH SLIDE DIP SPST 25MA 24 V...
- Page 12 STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
- Page 13 FCC Interference Statement for Class B EVM devices NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 14 【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの 措置を取っていただく必要がありますのでご注意ください。 1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用 いただく。 2. 実験局の免許を取得後ご使用いただく。 3. 技術基準適合証明を取得後ご使用いただく。 なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。 上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ ンスツルメンツ株式会社 東京都新宿区西新宿６丁目２４番１号 西新宿三井ビル 3.3.3 Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧ください。http:/ /www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 3.4 European Union 3.4.1 For EVMs subject to EU Directive 2014/30/EU (Electromagnetic Compatibility Directive): This is a class A product intended for use in environments other than domestic environments that are connected to a low-voltage power-supply network that supplies buildings used for domestic purposes.
- Page 15 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2018, Texas Instruments Incorporated...
- Page 16 IMPORTANT NOTICE FOR TI DESIGN INFORMATION AND RESOURCES Texas Instruments Incorporated (‘TI”) technical, application or other design advice, services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to assist designers who are developing applications that incorporate TI products;...
Need help?
Do you have a question about the TUSB564RNQ and is the answer not in the manual?
Questions and answers