Danfoss VLT 5000 Series Installation Startup Check List page 4

Model
5001
5002
5003
5004
5005
5006
5008
5011
5016
5022
5027
• 1 Hp = 0.746kW
• Each VLT 5000 can be under sized by 4 and over
sized by 1 – but watch current limits.
• This chart shows most of the Parameter 102 settings
The drive takes all size information in kilowatts (kW), so horsepower (Hp) must be converted
to kW. The formula is 1 Hp = ¾ of a kW. The chart above shows the equivalent.
Each drive size can be programmed to accommodate 4 sizes smaller and one size larger.
On the larger size – do not exceed the maximum current rating of the drive.
Parameter 102 in the Instruction Manual shows all the kW sizes.
Hp to kW Chart
Hp kW
0.25 0.18
0.33 0.25
0.50 0.37
0.75 0.55
1.0 0.75
1.5 1.1
2.0 1.5
3.0 2.2
4.0 3.0
5.0 4.0
7.5 5.5
10.0 7.5
15.0 11.0
20.0 15.0
25.0 18.5
Model Hp kW
5032 30.0 22.0
5042 40.0 30.0
5052 50.0 37.0
5062 60.0 45.0
5075 75.0 55.0
5100 100.0 75.0
5125 125.0 90.0
5150 150.0 110.0
5200 200.0 132.0
5250 250.0 160.0
5300 300.0 200.0
5350 350.0 250.0
5450 450.0 315.0
5500 500.0 355.0