Set Up Mientry - Mircom MiEntry TX3 Series Manual

3. Set up MiEntry

You now have the three pieces of information you need to configure the MiEntry
app to make SIP calls:
•
•
•
Note:
1.
2.
TX3 MiEntry Manual
8
Copyright 2018
Domain (for example sip1.mirconsip.com)
SIP username (for example jsmith_6)
SIP password
The first time that you open MiEntry, it will ask for permissions that
you must grant. See section 4.1 on page 18.
Open the MiEntry app.
Provide the following information as shown on the right.
Username. The SIP username (for example jsmith_6)
Password. The SIP password
Domain. The domain (for example sip1.mirconsip.com)
Transport (Android only). Leave as is (TCP).
Remember Me. Leave this setting on so that you will not have to enter
this information in the future.
SIP Username
jsmith_6
SIP Password
Domain
sip1.mirconsip.com
Figure 5. MiEntry registration on iOS
Configuring MiEntry