Starting / Stopping The Engine - Stihl BR 350 Instruction Manual

English
2
Run position F
Engine runs or is ready to start. Throttle trig‐
ger (2) can be moved to any position.
Switch off engine †
Ignition is interrupted, engine stops. The setting
lever (1) is not locked in this position. It springs
back to the run position F. The ignition is again
ready for operation.
Fixed throttle
2
The throttle trigger (2) can be locked in any posi‐
tion:
To disengage the lock:
► Return the setting lever (1) to the run posi‐
tion F.
1
2
Run position F
Engine runs or is ready to start. Throttle trig‐
ger (2) can be moved to any position.
10
1
1

9 Starting / Stopping the Engine

Switch off engine †
Ignition is interrupted, engine stops. The setting
lever (1) is not locked in this position. It springs
back to the run position F. The ignition is again
ready for operation.
Lock position C
The throttle trigger (2) can be locked in three
positions: 1/3 throttle, 2/3 throttle and full throttle.
To disengage the lock, move the setting lever (1)
back to the normal run position F.
9 Starting / Stopping the
Engine
9.1 Starting the Engine
► Observe safety precautions.
NOTICE
Start your unit on a clean, dust-free surface only
to ensure that no dust is sucked in.
► The setting lever must be on F
0458-456-8321-E