Table of Contents
Advertisement
PACMotion™ PSD Installation and User Manual
GFK-3168A
5.18.3
Possible Network Configurations
Figure 48: Network Configuration Example
5.18.4
Setting the IP Address IC830DP
Figure 49: Setting IP Address
The IP address can be flashed across the LED display if the B1 button is pressed.
You can use the rotary switches to set the IP address of the PSD. For some fieldbuses, the rotary
switches also set the node address of the drive for that specific network.
Mechanical Installation
Section 5
September 2020
91
Advertisement
Table of Contents
