Table of Contents
Advertisement
PACMotion™ PSD Installation and User Manual
GFK-3168A
Confirm that the link LEDs on the drive (green LED on the RJ45 connector) and on your PC are both
illuminated. If both LEDs are illuminated, then you have a working electrical connection.
Figure 53: LED
While the PC is connecting, your status bar will show the following acquiring icon:
Figure 54: Status Bar - Acquiring Connection
Wait for this icon to change to the limited functionality icon (this process can take up to one
minute).
Figure 55: Status Bar – Connection Complete
Although Windows displays this limited functionality icon for the drive connection, the PC can
communicate fully with the drive. Using PACMotion Workbench, you can now configure the drive
through this connection.
Setup
Section 6
September 2020
101
Advertisement
Table of Contents
