Advertisement
9/10/2007
724-746-5500
#21999
TECH SPECS
Modem Router Switch:
Altitude (Maximum) — 10,000 ft. (3048 m)
Compliance —
FCC Part 15, Class A;
FCC Part 68 Reg. Number 4E1USA-22465-KX-N;
No DOC approval or CE certification
MTBF — >50,000 hours
Switches — 8-position manual rotary; 4-bit DIP
Connectors — 40416: (4) RJ-11 female switched ports,
(1) RJ-11 female Telco line port, (2) RJ-11 female
Programming ports;
40417: (8) RJ-11 female switched ports, (1) RJ-11 female Telco
line port, (2) RJ-11 female Programming ports;
40418: (8) RJ-11 female switched ports, (2) RJ-11 female Telco
line ports; (2) RJ-11 female Programming ports
Indicators — LEDs: 40416: (4) Link, (1) Power, (1) Mode;
Top: 40419;
40417–40418: (8) Link, (1) Power, (1) Mode
bottom: 40417
Temperature Tolerance —
Operating: 32 to 122°F (0 to 50°C);
Storage: -40 to +158°F (-40 to +70°C)
Humidity Tolerance — Up to 95% relative (noncondensing)
Power — Wallmount power supply, 9 VAC, 1A, 115 VAC, 60 Hz;
Power consumption: 15 watts
Size — 0.8"H x 7.5"W x 4.3"D (2 x 19.1 x 10.9 cm)
Weight — 1 lb. (0.5 kg)
Remote-User Key:
Switches — 8-position manual rotary
Connectors — (2) RJ-11
Indicators — LEDs: (1) Verify condition
Size — 0.8"H x 1.5"W x 3"D (2 x 3.8 x 7.6 cm)
Weight — 0.25 lb. (0.11 kg)
AC Power Strip:
Switches — Main On/Off, On/Off Override
Connectors — (2) RJ-11, (6) AC receptacles
Indicators — LEDs: (1) Verify condition
Power — 115 VAC, 60 Hz
Size — 1.5"H x 12"W x 2.5"D (3.8 x 30.5 x 6.4 cm)
Weight — 2 lb. (0.9 kg)
blackbox.com
Technically Speaking
The Modem Router Switch has several user controls, LEDs,
and connectors. 40416 has (5) RJ-11 ports: (4) are switched,
(1) provides connection to the telco line, and (2) are for
programming. 40417 has (11) RJ-11 ports: (8) are switched,
(1) connects to the telco line, and (2) are used for programming.
40418 has (12) RJ-11 ports: (8) are switched, (2) connect to
telco lines, and (2) are used for programming.
The Remote-User Security Key has (2) RJ-11 programming
ports. A push button switch enables you to enter various
commands. A four-position DIP switch appends your personal
security code to the unique system code that is factory-
programmed into your system. This is transferred to the
Security Key (if used). A programming-mode switch programs
the router switch as well as the Security Key (if used). LEDs
on the device correspond to the switch positions. In the run
mode, they display the connected port number and flash
when the router switch rings that port. The LEDs also inform
you of the routing method, the status of outbound calls,
and more.
The Modem Router Switch also has a connection for
an alarm buzzer, which will sound for 2 seconds when
an unauthorized call is attempted. In addition, an LED
on the Modem Router Switch flashes red until another call
is received.
Item
Modem Router Switches
4 Ports, 1 Line
8 Ports, 1 Line
8 Ports, 2 Lines
You may also need...
Remote-User Security Key
6-Outlet AC Power Strip
Code
40416
40417
40418
40419
40420
3 of 3
Advertisement
