Cleaning The Press Tools; Performing Checks - Viega 6 PlusPress Instructions For Use Manual

3.8.1

Cleaning the press tools

Press machine
Press jaws and press rings
3.8.2

Performing checks

Pressgun 6 PlusPress machine with rechargeable battery and Bluetooth interface
NOTICE!
Damage due to fluids!
Make sure that no fluids get inside the press machine.
Never dip the press machine into fluids.
Requirements:
The press machine is not energised (rechargeable battery has been
n
removed).
No press jaw is inserted.
n
▶ Wipe the press machine down with a slightly damp cloth.
▶ Clean the press rolls of the roller head dry and then treat with main‐
tenance oil (art. no. 667 924).
▶ Remove dirt and metallic residues from the press jaw or the press
ring.
▶ Remove residues from the press jaw contour (e.g. using Viega
cleaning fleece, art. no. 104 412).
▶ Apply maintenance oil to the hinges and all moving parts (art.
no. 667 924).
▶ Then thinly spray the press jaw or press ring with maintenance oil
(art. no. 667 924) and let it work for a short time before wiping off
with a lint-free cloth.
To ensure trouble-free operation, perform checks at regular intervals:
▶ At the end of each use, check the press contour of the press jaws
and press rings for damage or visible wear.
▶ Check the press jaws and press rings for smooth operation.
▶ Check all press jaws and press rings for proper function by carrying
out a test pressing with press connector inserted.
In case of malfunctions, contact an authorised service partner.
Handling
28