Carrying Out The Pressing Process - Viega 6 PlusPress Instructions For Use Manual

3.5

Carrying out the pressing process

Pressgun 6 PlusPress machine with rechargeable battery and Bluetooth interface
▶ Insert the press jaw in the press jaw fixture of the cylinder head.
INFO!
The figures show the typical use of a press jaw. Use
the hinged adapter jaws in the same way.
▶ Slide the retaining bolt in as far as it will go.
▶ Press the On/Off button.
The green LED is lit. The press machine is ready for operation.
▷
CAUTION!
Risk of crushing due to improper use!
Do not start the press machine without a press jaw
n
inserted.
Do not reach into the area of the moving roller head or
n
press jaws during pressing.
Hold the press machine on the gripping surfaces.
n
NOTICE!
Risk of property damage due to damaged
press jaws!
Using a damaged, incorrectly dimensioned, or worn press
jaw may result in an incorrect pressing.
Check the press jaw before use for any visible defect,
n
and if applicable replace the press jaw.
Only use press jaws that are the right dimension and
n
are compatible with the press connector system.
Handling
24