Table of Contents
Advertisement
482
TECHNICAL SPECIFICATIONS
6.7L DIESEL ENGINE
Engine Coolant
Engine Oil
Engine Oil Filter
Fuel Filters
Crankcase Ventilation Filter
Component
Fluid, Lubricant, or Genuine Part
We recommend you use Mopar® Antifreeze/Coolant 10 Year/150,000 Mile
(240,000 km) Formula OAT (Organic Additive Technology).
In ambient temperatures above 0°F (-18°C), we recommend you use
10W-30 engine oil such as Mopar®, Shell Rotella and Shell Rimula that
meets the manufacturer Material Standard MS-10902 and the API CK-4
engine oil category is required. Products meeting Cummins® CES
20081 may also be used. The identification of these engine oils is
typically located on the back of the oil container.
In ambient temperatures below 0°F (-18°C), we recommend you use
5W-40 synthetic engine oil such as Mopar®, Shell Rotella and Shell
Rimula that meets the manufacturer Material Standard MS-10902 and
the API CK-4 engine oil category is required.
We recommend you use a Mopar® Engine Oil Filter. If a Mopar® Engine
Oil Filter is unavailable only use filters that meet or exceed SAE/
USCAR-36 Filter Performance Requirements.
We recommend you use Mopar® Fuel Filter. Must meet 3 micron rating
(engine mounted filter). Must meet 5 micron rating (chassis mounted
filter). Using a fuel filter that does not meet the manufacturer's filtration
and water separating requirements can severely impact fuel system life
and reliability.
We recommend you use Mopar® CCV Filter.
Advertisement
Table of Contents
