Table of Contents
Advertisement
356
SAFETY
Can a child seat be installed in the center position
using the inner LATCH lower anchorages from the
outboard seating positions?
Can two child restraints be attached using a common
lower LATCH anchorage?
Can the rear-facing child restraint touch the back of the
front passenger seat?
Can the rear head restraints be removed?
Frequently Asked Questions About Installing Child Restraints With LATCH
No – Crew Cab Full Bench rear seat
Regular Cab Front / Crew Cab with full bench rear
seat: Use the seat belt and tether anchor to install a
N/A – Regular Cab
child seat in the center seating position.
Crew Cab with split bench rear seat / Mega Cab: Child
restraints can be installed using the supplied lower
anchorages for the center seating position.
Never "share" a LATCH anchorage with two or more
child restraints. If the center position does not have
dedicated LATCH lower anchorages, use the seat belt
No
to install a child seat in the center position next to a
child seat using the LATCH anchorages in an outboard
position.
The child seat may touch the back of the front passen-
ger seat if the child restraint manufacturer also allows
Yes
contact. See your child restraint owner's manual for
more information.
The head restraints can be removed in every rear seat-
Yes
ing position if they interfere with the installation of the
child restraint Ú page 40.
Advertisement
Table of Contents
