RAM 2500 2021 Owner's Manual page 378

376 IN CASE OF EMERGENCY
Remove the jack and tools from the bracket
assembly. Turn the jack turn-screw
counterclockwise to release jack from bracket
assembly.
Jack And Tools Bracket Assembly
Jacking Tools
There are two ways to assemble the tools:
Assembled For Spare Tire Lowering/Raising
Assembled For Spare Tire Lowering/Raising
1 — Lug Wrench
2 — Extension 2
3 — Extension 3
4 — Extension 4
CAUTION!
The lug wrench can only be attached to

extension two (2).
When attaching the tool to the winch mech-

anism be sure the large flared end opening
on extension four (4) is positioned correctly
over the winch mechanism adjusting nut.
CAUTION! (Continued)
Damage to the lug wrench, extensions and

winch mechanism may occur from
improper tool assembly.
Assembled For Jack Operation
Assembled For Jack Operation
1 — Lug Wrench
2 — Extension 2
3 — Extension 3
4 — Extension 4
5 — Jack Driver
(Continued)