Operating Elements - Omron YSC-8361 Instruction Manual

Constant-Stitch
Sewing
Bar-Tacking
Sewing
Lower thread
Counter
Soft start
Needle Up / Needle
Down
Trimming Enable
Interface
Selection
One-Key Default
/Lock keys
Parameter
Function
Save
Add
Sub

5. OPERATING ELEMENTS

5.1 Single start tacking setting

A Stitches = 0
Seven-segment display A display 『-』.
Sewing process: B stitches back – normal sewing.

A Stitches ≠ 0
Sewing process: A stitches forth – B stitches back – normal sewing
5.2 Double start tacking setting
start normal sewing. Once the pedal returned to
balance, machine will stop immediately.
▲ As the pedal stepped backward, the end
tacking, trimming and wiping(if selected) will be
done automatically
▲ Once the pedal is stepped forward, F, G stitches will
be completed with E times.
▲ Constant-Stitch Sewing will perform the number of
segments and times as setting, when the stitches are
zero, machine will stop immediately.
▲ Once the pedal is stepped forward, all the seams of
bar tacking, A, B, C, D sections will be completed with
E times, and the trimming will be done automatically.
▲ The pedal must be returned to balance for next
sewing.
Enter lower thread counter interface
Enable or disable the soft start
Select the stop position of needle bar
Enable or disable the trimming
Switch current interface to another
Enter or exit parameter function interface
Confirm and save current value of parameter
Value increase
Value decrease
4