Run Screen (Self-Service Mode) - Fagor LAP-08 Maintenance And Configuration

2.7.3 Run screen (Self-service mode)

Press the
parameters of the run screen.
2.7.3.1 Stop button, STOP
Press the
default this is enabled.
2.7.3.2 Remaining time
Press the
the programme progress indicator on the run screen. By default it is enabled.
2.7.3.3 Machine identifier
By pressing the
allocated to the identifier can be edited (between 1 and 99) using the
With the option
following screen is displayed.
key, in the HUD self-service menu, to go to the menu screen to configure the
key to hide the stop button so that the user cannot stop the programme. By
key to activate / deactivate the option to display/hide the total time remaining and
key, the machine identifier can be enabled/disabled, and the number to be
keys. By default it is disabled.
this option is enabled, and to go to the identifier editor, press
and
, and the
47