Log; Error Log - Fagor LAP-08 Maintenance And Configuration

Running the autotest programme is the same as running any other programme with one
exception.
When the "Stop programme" parameter is active in the current phase, a pause is made before
starting to run the phase in question as occurs with any programme. However, in addition to the pause,
a summary is displayed of the most significant parameters from the previous phase (maximum
temperature reached, maximum speed reached, maximum level reached and true phase time).
In addition, when the programme ends, the same parameters are displayed, referring to the
maximum programme values.
It is possible to display all the parameters (settings, true values and status of inputs and outputs),
by pressing the RUN MENU button as in a normal run command.

0.3 Log

On the main maintenance screen select the icon
Press
2 different types of log can be viewed on this screen:

Error log

-
- Value log
0.3.1 Error log
On the log screen, press the
displayed, together with the date / time at which they occurred.
to return to the SAT screen.
key and go to the error log. The last 20 errors recorded are
, and go to the log menu.
11