Advertisement
If you have a problem, question, or request, call
your local dealer, or Coalesse at 1.800.627.6770
Or visit our website: www.coalesse.com
©
2016 Coalesse
San Francisco, California U.S.A.
Printed in U.S.A.
Lagunitas
Booth Screen Installation Instructions
®
SCREEN
GANGING
CLIP
T-30 Torx Bit with
BOTTOM
GANGING
BRACKET
Extension
Hot Knife
Page
of
69925 Rev
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Coalesse Lagunitas
Summary of Contents for Coalesse Lagunitas
- Page 1 T-30 Torx Bit with Extension BOTTOM GANGING Hot Knife BRACKET If you have a problem, question, or request, call your local dealer, or Coalesse at 1.800.627.6770 Or visit our website: www.coalesse.com © 2016 Coalesse San Francisco, California U.S.A. Page Printed in U.S.A.
- Page 2 FABRIC SCREEN GANGING CLIP INSTALLATION (The instructions on this page only apply if your unit has upholstered screens. If your unit has mesh screens, please continue to page 3) WARNING: Ganging units using the screen ganging clip will 4” require creating a hole in the upholstery. This hole is only visible if the units are separated.
- Page 3 MESH SCREEN GANGING CLIP INSTALLATION: WARNING: Ganging units using the screen ganging clip will require creating a hole in the upholstery. This hole is only visible if the units are separated. NOTE: The screen ganging clip can only be used if the adjoining screens are the same height.
- Page 4 MESH AND FABRIC SCREEN BOTTOM GANGING BRACKET INSTALLATION AND GANGING: WARNING: To avoid damage to product it is recommended that two (2) persons, minimum, are present to safely complete this installation. CENTER SCREEN NOTE: This procedure outlines connecting two lounge units using the booth screen COLAGLBS, resulting in an enclosed booth screen PROVIDED application.
Need help?
Do you have a question about the Lagunitas and is the answer not in the manual?
Questions and answers