Starting And Checking The Unit - Komfovent DOMEKT C8 Installation Manual

5. STARTING AND CHECKING THE UNIT

Check for any foreign objects, garbage, or tools inside the unit before turning it on. Check that air filters are installed, or
that condensate drainage is connected (if required), and fill the siphon with water. Inspect the duct system for unnecessary
obstructions such as fully closed diffusers, regulation dampers, check that outdoor air grills are not blocked.
• The air handling unit can only be started when it is fully installed, with ducts and external electrical
elements connected. Do not start the unit without duct system, as this may distort the measure-
ment of the airflow required for stable fan control.
• Do not use the unit with a temporary electrical power supply as unstable power can damage the
electronic components.
The air handling unit can be equipped with one of two control panels
• C6.1 control panel with touch screen and colour display. Many functions and settings of the AHU can be reviewed and
adjusted on the panel.
• C6.2 control panel with touch buttons that can only switch between basic ventilation modes and settings.
By default, the following standard ventilation modes are preprogrammed in the unit:
Vėdinimo intensyvumas
Ventilation
intensity
Set
temperature
Depends on your order.
1
UAB KOMFOVENT we reserve the right to make changes without prior notice
DOMEKT_C8_21-01
16:30
NORMAL
ECO AUTO
Fig. 19. Control panels C6.1 and C6.2
MINIMALUS
AWAY
Vėdinimo intensyvumas
20%
Pageidaujama Pageidaujama
20%
temperatūra
20°C
20°C
:
1
ECO
NORMALUS
NORMAL INTENSIVE
Vėdinimo intensyvumas
50%
Pageidaujama
50%
temperatūra
20°C
20°C
АUТО
INTENSYVUS MAKSIMALUS
Vėdinimo intensyvumas
70%
Pageidaujama
70%
temperatūra
20°C
20°C
BOOST
100%
100%
temperatūra
20°C
20°C
27