Mechanical Installation; List Of Parts In The Package; Installation Site Requirements; Maintenance Area - Komfovent DOMEKT C8 Installation Manual

EN

3. MECHANICAL INSTALLATION

3.1. List of parts in the package

Before installing the unit, check for any missing parts. If something is missing from the list, contact the company that sold
the air handling unit.
1. Air handling unit.
2. Control panel C6.1 or C6.2
3. Control panel cable.
4. Unit suspension brackets
5. Mounting bolts for brackets
6. User guide.
7. Installation manual.

3.2. Installation site requirements

DOMEKT units are designed for installation in household or technical rooms with an air temperature of 0 °C to +40 °C,
relative humidity from 20% to 80% (non-condensing). It is recommended to install the air handling unit in a separate room or
in an insulated attic on a solid, level base with vibration damping mat. We recommend not to rest the unit against the wall to
prevent noise or vibration and accumulation of moisture or mould on the wall due to condensation.
It is forbidden to install DOMEKT air handling units outdoors. They are also not designed for ventila-
tion or dehumidification of humid premises (swimming pools, baths, car washes, etc.).

3.2.1. Maintenance area

When selecting the installation or mounting location of the unit, provide unrestricted and safe access to the equipment
for its repair or preventive maintenance. The inspection opening (if any) should not be less than the size of the unit and the
installation must allow easily dismantlement if necessary (e.g. in the case of complicated repairs). Minimum space for main-
tenance refers to an area free of any fixed or immovable equipment, constructions, walls, structures or furniture.
Some DOMEKT units can be mounted on walls, whereas thinner DOMEKT units are designed for ceiling mounting. Re-
gardless of the mounting type (wall or ceiling), the unit must be fitted with anti-vibration gaskets so that the vibrations of the
unit are not transmitted to the structure. For wall mounted units: anti-vibration strips are attached to the top and bottom of
the backside (at mounting brackets) so that the gaskets are pressed against the wall when the unit is mounted. Some units
are supplied with factory fitted anti-vibration gaskets; in other cases, they are supplied separately.
Depends on your order.
1
Only for units to be mounted on the wall or ceiling.
2, 3
10
.
1
.
2
.
3
UAB KOMFOVENT we reserve the right to make changes without prior notice
DOMEKT_C8_21-01