Pci / Plug And Play Setup - PCchips M7 Manual

BIOS Setup

PCI / Plug and Play Setup

Choose the item from the BIOS Setup main menu.
Plug and Play Set this option to Yes if the operation system in
Aware OS this computer is aware of and follows the Plug
and Play specification. Currently, Windows 95/98
are PnP-aware.
Clear NVRAM Set this option to Enabled clear the NVRAM
when system boot up to the test procedure.
PCI Latency Timer Set this option to specify the proper PCI latency
(PCI Clocks) timer.
Primary Graphics Set this option to select AGP or PCI VGA for
Adapter primary graphics adapter.
PCI VGA Palette When this option is set to Enabled, multiple VGA
Snoop devices operating on different buses can handle
data from the CPU on each set of palette
registers on every video device.
PCI IDE Bus Set this option to Enabled the bus master for PCI
Master IDE.
OffBoard PCI IDE This option specifies if an offboard PCI IDE
Card controller adapter card is installed in the
computer. You must specify the PCI expansion
slot on the motherboard where the offboard PCI
IDE controller is installed. If an offboard PCI
IDE controller is used, the onboard IDE
controller is automatically disabled. If an
offboard PCI IDE controller adapter card is
installed in the computer, you must also set the
Pri. OffBoard PCI IDE IRQ and Sec. OffBoard
PCI IDE IRQ options.
29