Key Features - PCchips M7 Manual

2

Key Features

The advanced features of the mainboard include:
Supports Pentium II 233~500 MHz and Celeron 266~333 TM
MHz CPUs with Frequency at 66 or 100 MHz in Slot 1 for
Micro ATX Form Factor;
Provides 3 DIMMs for DDR/SDRAM/EDO memory modules
and is expandable up to 768MB, selectable 66 or 100MHz
clock speed for SDRAM when 100MHz bus clock is being
used;
Supports ACPI, Legacy PMU and the Ultra DMA/33, fully
compliant to PC97 & PC98;
Built-in high performance 64bit 3D AGP Graphics Accelerator
with 8MB frame buffer;
Built-in Hardware Monitor circuit supports thermal, power
and fan speed monitor, optional Intel LANDesk Client Manager
(LDCM) support;
Bundled AMI Desktop Client Manager for abnormal condition
detect and thermal management through the network link or self
take care;
Provides ATX power connector, and supports various features
of ATX power, such as Power Button/Suspend, Alarm Wake
Up, Interrupt Wake-up from keyboard/mouse, Modem Ring
On, Wake-up On LAN;
Provides 3 PCI, 1 ISA slots, and PCI Bus Master IDE interface
supports 4 IDE devices with 2 channels;
Onboard super Multi-I/O chip supports 2 serial ports with
16550 compatible Fast UART, 1 IR port, 1 parallel port with
EPP and ECP capabilities, and one floppy disk drive interface
with 1 Mb/s transfer rate;
Bundled PC-cillin98 (OEM) Provides automatic virus
protection for Windows 95/98 and the Internet;
Onboard 3D Sound Pro meets PC'98 spec. and support HRTF
Positional Audio, Direct Sound 3D, provide drivers for 3D
games that use Aureal software interface, Software Wave-table
Synthesizer, and Digital Audio Interface (SPDIF) IN/OUT.
Chapter 1