Hardware Monitor - PCchips M7 Manual

BIOS Setup
OnBoard Serial This option to specify the base I/O port address
Port2 of serial port 2.
OnBoard Ir Port This option to specify serial port 1/2 for IR
function.
Ir Mode Set this option to specify the IR mode, HPSIR or
ASKIR.
OnBoard Parallel Set this option to specify the base I/O port
Port address of the parallel port on the motherboard.
Parallel Port Mode Depends on the type of your external device
which connects to this port.
Parallel Port IRQ Set this option to specify IRQ for parallel port.
Parallel Port DMA This option is only available if the setting of the
Channel Parallel Port Mode option is ECP.
OnBoard IDE Set this option to specify the channel used by the
IDE controller on the motherboard.

Hardware Monitor

Set CPU Fan Set this option to specify the fan lowest count
(Lowest Count) of CPU alarm.
Current CPU/System These options are displayed only show the
Temperature/Fan status of system hardware.
Speed; Vin1,Vin2,
Vid,AVDD Voltage
31