Parker A Series Installation & Service Instructions Manual page 6

isysNet 24 VDC Analog Input Modules, Series A (PSSNACM12A, PSSNAVM12A)
Add Analog Input Modules to RSLogix 5000
I/O Configuration
To add your analog input modules to RSLogix 5000 I/O configuration,
follow these steps:
• In RSLogix 5000:
- For ControlNet, highlight the PSSCCNA or 1738-ACNR
Shown), right click and select New Module.
- For EtherNet/IP, highlight the PSSCENA or1738-AENT
(Shown), right click and select New Module.
If your RSLogic 5000 is Version 15.X or greater:
• Choose the PSSNACM12A module from the list of Parker
modules.
• Enter a name and click OK.
• Notice that the PSSNACM12A is now under the I/O
configuration.
6
E110P