Specifications - Parker A Series Installation & Service Instructions Manual

isysNet 24 VDC Analog Input Modules, Series A (PSSNACM12A, PSSNAVM12A)

Specifications -

Following are specifications for the PSSNACM12A and PSSNAVM12A analog input modules.
Analog Input Modules
Inputs per Module
Input Voltage
Input Current
Input Impedance
Resolution
Absolute Accuracy
1
Accuracy Drift w/Temp.
Input Update Rate (per module)
Step Response (per module)
Digital Filter Time Constant
Input Resistance
Conversion Type
Common Mode Rejection Ratio
Normal Mode Rejection Ratio
Data Format
General Specifications
Maximum Overload
Calibration
Indicators
Keyswitch Position
PointBus Current
Power Dissipation
Thermal Dissipation, Maximum
Isolation Voltage
(continuous voltage withstand rating)
External DC Power
Supply Voltage
Voltage Range
Supply Current
Dimensions
Operating Temperature
Storage Temperature
Relative Humidity
Shock
Vibration
ESD Immunity
Radiated RF Immunity
EFT/B Immunity
Surge Transient Immunity
Conducted RF Immunity
Emissions
Enclosure Type Rating
Mounting Base Screw Torque
Wiring Category
2
Weight
Certifications:
(when product is marked)
1. Includes offset, gain, non-linearity and repeatability error terms.
2. Use this Conductor Category information for planning conductor routing. Refer to Publication E115P, "Industrial Automation Wiring and Grounding Guidelines".
2 single ended, nonisolated
PSSNAVM12A only
0-10V (user configurable) (-0.0V under, +0.5V over)
±10V (user configurable) (-0.5V under, +0.5V over)
PSSNACM12A only
4-20 mA
0-20 mA
PSSNACM12A - 60Ω
PSSNAVM12A - 100kΩ
PSSNACM12A - 16 bits - over 0-21 mA; 0.32µA/cnt
PSSNAVM12A - 15 bits plus sign; 320µV/cnt in unipolar or bipolar mode
0.1% Full Scale @ 25°C
PSSNACM12A - 30ppm/°C
PSSNAVM12A - 5ppm/°C
100 ms @ Notch = 60 Hz (default)
120 ms @ Notch = 50 Hz
24 ms @ Notch = 250 Hz
12 ms @ Notch = 500 Hz
70 ms @ Notch = 60 Hz (default)
80 ms @ Notch = 50 Hz
16 ms @ Notch = 250 Hz
8 ms @ Notch = 500 Hz
0-10,000 ms (default = 0 ms)
PSSNAVM12A only
200kΩ
Delta Sigma
120 dB
-60 dB
-3 dB
Notch filter
15.7 Hz @ Notch = 60 Hz
13.1 Hz @ Notch = 50 Hz
65.5 Hz @ Notch = 250 Hz
131 Hz @ Notch = 500 Hz
Signed integer
Fault protected to 28.8VDC
Factory calibrated
1 green/red module status indicator, logic side
1 green/red network status indicator, logic side
2 green/red input status indicators, logic side
3
75 mA @ 5VDC
PSSNACM12A - 0.6W @ 28.8VDC
PSSNAVM12A - 0.75W @ 28.8VDC
PSSNACM12A - 2.0 BTU/hr. @ 28.8VDC
PSSNAVM12A - 2.5 BTU/hr. @ 28.8VDC
50V rms
Tested at 1250VAC rms for 60s
24VDC nominal
10-28.8VDC
PSSNACM12A - 10 mA @ 24VDC; PSSNAVM12A - 15 mA @ 24VDC
Imperial (Metric) 1.25H x 2.63W x 4.25D (31.75H x 66.80W x 107.95D)
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock):
-20 to 60°C (-4 to 140°F)
IEC 60068-2-1 (Test Ab, Un-packaged Non-operating Cold),
IEC 60068-2-2 (Test Bb, Un-packaged Non-operating Dry Heat),
-40 to 85°C (-40 to 185°F)
IEC 60068-2-30 (Test Db, Un-packaged Non-operating Damp Heat): 5 to 95% non-condensing
IEC60068-2-27 (Test Ea, Unpackaged Shock):
Operating 30g
Non-operating 50g
IEC60068-2-6 (Test Fc, Operating): 5g @ 10 to 500Hz
IEC 61000-4-2: 6kV contact discharges, 8kV air discharges
IEC 61000-4-3:
10V/m with 1kHz sine-wave 80%AM from 30MHz to 2000MHz
10V/m with 200Hz 50% Pulse 100%AM at 900Mhz
10V/m with 200Hz 50% Pulse 100%AM at 1890Mhz
IEC 61000-4-4: ±3kV at 5kHz on signal ports
IEC 61000-4-5: ±2kV line-earth(CM) on shielded ports
IEC 61000-4-6: 10Vrms with 1kHz sine-wave 80%AM from 150kHz to 80MHz
CSPR 11: Group 1, Class A
Meets IP65/66/67 (when marked)
#8 screw, 7.5 in. lbs. in Aluminum, 16 in. lbs. in Steel
1 - on signal ports
Imperial (Metric) 0.637 lb. (0.289 kg)
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada
CE European Union 89/336/EEC EMC Directive, compliant with:
EN 61000-6-4; Industrial Emissions
EN 50082-2; Industrial Immunity
EN 61326; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
C- Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
8
E110P