Toshiba MY-1016 Service Manual page 21

[H] SFB feed roller
1. Remove SFB hinge unit. (See Fig. 6-1 to 6-4)
2. Remove SFB document tray assembly.
(See Fig. 6-6)
3. Detach SFB feed cover.
(See Fig. 6-11 and 6-13)
4. Remove the screw and detach the guide plate
F.
5. Detach stop ring, and remove clutch and SFB
feed roller.
[I] SFB pickup roller
1. Remove SFB hinge unit. (See Fig. 6-1 to 6-4)
2. Remove SFB document tray assembly.
(See Fig. 6-6)
3. Detach SFB feed cover.
(See Fig. 6-11 and 6-13)
4. Remove the stop ring and take out the pickup
roller shaft.
5. Detach the pickup roller by releasing the timing
belt 142.
MY-1016 DISASSEMBLY AND REPLACEMENT
Guide plate F
Stop ring
Pickup roller shaft
Pickup roller
6 - 6
Screw
Fig. 6-20
SFB feed roller
Clutch
Fig. 6-21
Stop ring
Fig. 6-22
October 2000 © TOSHIBA TEC
258
259
260