Table of Contents
Advertisement
5. Remove one screw and remove SFB pinion
plate.
6. Remove one screw and remove SFB PWA plate.
7. Remove SFB document guide flange.
Notes: 1. Put 0.2 grams of silicon oil (TSF451) on
the side of the guide rail.
Never put silicon oil on the paper feed
side.
2. Put 0.05 grams of silicon oil (TSF451)
inside the SFB document guide rack.
Note: Set SFB document guide flange so that the
convexity of SFB PWA plate is positioned
as shown right when SFB PWA plate is
mounted.
[E] SFB cover/SFB brake pad assembly
1. Remove SFB hinge unit. (See Fig. 6-1 to 6-4)
2. Remove SFB document tray assembly.
(See Fig. 6-6)
3. Remove 4 screws, release 2 tabs, and remove
SFB brake pad assembly.
Note: For reassembly, mount the screws in the
order shown right.
October 2000 © TOSHIBA TEC
SFB pinion plate
Screw
SFB document
guide flange
SFB document
guide flange
Screw
6 - 3
MY-1016 DISASSEMBLY AND REPLACEMENT
SFB PWA plate
Screw
Fig. 6-9
Fig. 6-10
SFB PWA plate
Fig. 6-11
Screw
SFB brake pad
assembly
Fig. 6-12
250-3
250-5
250-4
251
Advertisement
Table of Contents
