Toshiba MY-1016 Service Manual page 17

Notes: For installation, follow the procedure de-
scribed below.
1 Insert SFB hinge shaft into SFB docu-
ment tray assembly.
2 Turn SFB hinge unit by 180 degrees, hook
it to SFB, and fix it with 2 screws.
[C] SFB document tray assembly
1. Remove SFB cover. (See Fig. 6-1)
2. Detach one connector and release 2 clamps.
3. Remove SFB hinge unit. (See Fig. 6-4)
4. Release the stud and remove SFB document
tray assembly.
[D] SFB document tray upper/SFB document tray lower/
SFB document tray support/SFB PWA plate/
SFB document guide flange
1. Remove SFB document tray assembly.
(See Fig. 6-6)
2. Remove 3 screws, release 7 hooks, and detach
SFB document tray upper.
3. Remove SFB document tray support.
4. Release 4 hooks and detach the SFB document
tray 2nd support.
MY-1016 DISASSEMBLY AND REPLACEMENT
Screw
SFB hinge unit
Stud
SFB document
tray assembly
Hook
Hook
SFB document
tray lower
6 - 2
Hook
Fig. 6-5
Connector
Fig. 6-6
SFB document tray upper
Screw
Screw
SFB document
tray support
Fig. 6-7
Fig. 6-8
October 2000 © TOSHIBA TEC
248
249
250-1
250-2