Toshiba MY-1016 Service Manual page 20

[G] SFB feed roller shaft assembly
1. Remove SFB hinge unit. (See Fig. 6-1 to 6-4)
2. Remove SFB document tray assembly.
(See Fig. 6-6)
3. Detach SFB feed cover.
(See Fig. 6-11 and 6-13)
4. Remove SFB feed roller assembly.
(See Fig. 6-14 and 6-15)
5. Detach one connector, loosen one screw, and
remove SFB clutch motor.
6. Remove one screw and remove guide plate R.
7. Remove one screw and remove roller bracket.
8. Detach E-ring and remove bushing.
9. Remove SFB feed roller shaft assembly.
Note: Be sure to attach the spring when attach-
ing the SFB feed roller shaft assembly.
October 2000 © TOSHIBA TEC
Connector
SFB clutch motor
Guide plate R
257-1
SFB feed
roller shaft assembly
6 - 5 MY-1016 DISASSEMBLY AND REPLACEMENT
Screw
Fig. 6-17
Screw
Fig. 6-18
Screw
Spring
E-ring
Bushing
Fig. 6-19
256
257-2