Table of Contents
Advertisement
4. Release SFB pad spring and remove SFB brake.
Note: Clean the SFB brake pad with a cloth moist-
ened with alcohol by pressing hard, and go-
ing back and forth on the brake pad more
than 20 times.
5. Remove 2 screws, release 2 tabs, and detach
SFB feed cover.
[F] SFB clutch pulley/SFB flange wheel
1. Remove SFB hinge unit. (See Fig. 6-1 to 6-4)
2. Remove SFB document tray assembly.
(See Fig. 6-6)
3. Detach SFB feed cover.
(See Fig. 6-11 and 6-13)
4. Detach stop ring and remove bushing.
5. Release 3 clamps and detach the harness.
6. Remove one screw and detach the ground wire.
7. Remove 2 screws, release 2 tabs, slide SFB
feed roller assembly in the direction of the ar-
row, and remove SFB clutch pulley assembly.
Note: Before attaching the SFB feed roller assem-
bly, loosen 2 screws securing the SFB feed
roller fixing plate.
Attach the SFB brake pad assembly (See
Fig. 6-10), then fix the SFB feed roller fixing
plate in place.
MY-1016 DISASSEMBLY AND REPLACEMENT
SFB brake
SFB feed cover
Screw
Stop ring
Bushing
Ground wire
Screw
SFB clutch motor
SFB feed roller
SFB clutch
fixing plate
pulley assembly
6 - 4
SFB brake pad
SFB pad spring
Fig. 6-13
Screw
SFB feed assembly
Fig. 6-14
Clamp
Harness
Clamp
Fig. 6-15
Screw
SFB feed roller
assembly
Bushing
Fig. 6-16
October 2000 © TOSHIBA TEC
252
253
254
255
Advertisement
Table of Contents
